--- title: "Physically Set Up Your EMV Device for Converge" slug: "physically-set-up-your-emv-device-for-converge" description: "This article will give an overview of how to procure and set up devices for Converge." updated: 2025-11-06T18:39:32Z published: 2025-11-06T18:39:32Z canonical: "www.civicplus.help/physically-set-up-your-emv-device-for-converge" --- > ## Documentation Index > Fetch the complete documentation index at: https://www.civicplus.help/llms.txt > Use this file to discover all available pages before exploring further. # Physically Set Up Your EMV Device for Converge This article will give an overview of how to procure and set up devices for Converge. ## Purchasing Your devices must be purchased directly from Elavon. See the [hardware overview article](/civicplus-help-center/docs/gateway-hardware-overview) for more information. ## Disclaimer CivicPlus does not support, nor troubleshoot, hardware provided by third parties. For issues following the documentation linked below, please [contact Elavon’s support team](/civicplus-help-center/docs/converge-support). --- ## Requirements for Ingenico Lane 3000 and 5000 You will need the following to get started: - Payment Terminal - Power Supply ### Instructions 1. Plug in the payment terminal to the back of the device 2. Plug in the power supply to the main cable 3. Plug in the USB cable to your computer 4. Plug the power supply into an electrical outlet ![Lane3000 device.](https://cdn.us.document360.io/17dc564a-8310-4f61-b929-1bd73b36e158/Images/Documentation/9404264842263.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A08%3A43Z&se=2026-11-22T14%3A08%3A43Z&sr=b&sp=r&sig=srd73T3cJptUPZ2A%2FrxRl8MtyPA1Np0aLdVu%2B01GsiM%3D) --- ## Requirements for iPP 320 and iSC Touch 250 You will need the following items before you get started: - Payment Terminal - Magic Box - Power Supply - USB A to USB B cable (printer cable) > [!WARNING] > **Note**: Some devices come with a USB connector cable and do not need a magic box. --- ## Documentation Follow the directions on the Converge developer website to install the power supply and magic box. You only need to follow the physical setup instructions. **Do not follow the instruction for "Configure the Card Reader to Communicate via IP".** We are integrated to communicate over USB, not over IP. - [iPP 320](https://developer.elavon.com/docs/commerce-sdk/1.0.0/cardreaders/ingenico/ipp320) - [iSC Touch 250](https://developer.elavon.com/docs/commerce-sdk/1.0.0/cardreaders/ingenico/isc250) After installing the power supply and magic box, insert the USB cable between the magic box and your computer. ![Magicbox USB cable example.](https://cdn.us.document360.io/17dc564a-8310-4f61-b929-1bd73b36e158/Images/Documentation/1500007806921.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A08%3A43Z&se=2026-11-22T14%3A08%3A43Z&sr=b&sp=r&sig=VbVWDDs8veQqJxC%2F3d428l4q3lQJDDSRy1g1i7xvSwU%3D) As seen in the picture above, the magic box connects the payment terminal, power supply, and your computer together. Universal Serial Bus Internet Protocol.A set of rules for communication over the internet or a local network, such as sending mail, streaming videos, or connecting to a website.